The machines are suitable for steps after PCB drilling and before PCB packaging,
detecting the number of holes, hole diameter and quality (such as plug hole, foreign bodies, trough long and short defects), and make OK / NG judgment automatically.
Equipped with double sorting equipment, which can detect two plates at the same time.
C . Characteristics
With network maintenance function, it can use several terminals to view NG board defect information synchronously, and to overhaul the NG board rapidly.
ITEM
Online Hole Checker (Model JK8000)
Dimension
Length
Scanner 1550 mm
Width
1280 mm
Height
1520 mm
CIS
Contact image sensor
Light
Bar red LED light source
Maximum diameter ratio
25:1
Measurable thickness
(1)0.3 mm to 10.0 mm;
(2)PCB which thickness less than 0.3mm shall be
submitted for sample confirmation;
PCB size
Width:80〜650mm;
Length:100〜650mm;
Pore size range
Φ0.10mm〜Φ10mm
Min margin ofpunching hole
0.1mm
The maximumnumber of holes in thetested plate
800,000 (round hole) ;
Measuring speed
The four gears of the measured velocity scanning part were available）：3.0±0.5m/min;6.5±0.6m/min;10±0.8m/min;12.5±0.8m/mi;Remark: The drill plate is up to 6.5m/min.
Repeatprecision (round hole)
±30um
Repeatprecision (non-circular
hole)
Slot: plus or minus 75um;
Irregular holes: 150um;
Aperture accuracy (roundhole)
+/-20um(aperture≤1mm)
+/-30um(4mm>aperture>1mm)
+/-40um(aperture≥4mm)
Inspection linenumber
standard machine: single line, 2 lines;(above line 3, pleaseseparately inquire).
USAGE
The machines are suitable for steps after PCB drilling and before PCB packaging,
detecting the number of holes, hole diameter and quality (such as plug hole, foreign bodies, trough long and short defects), and make OK / NG judgment automatically.
FEATURES
A . Precise
Adopting high-precision CIS scanning system, automatic positioning, image processing and detection technologies.
B. Efficient：
Equipped with double sorting equipment, which can detect two plates at the same time.
C . Characteristics
With network maintenance function, it can use several terminals to view NG board defect information synchronously, and to overhaul the NG board rapidly.
ITEM
Online Hole Checker (Model JK8000)
Dimension
Length
Scanner 1550 mm
Width
1280 mm
Height
1520 mm
CIS
Contact image sensor
Light
Bar red LED light source
Maximum diameter ratio
25:1
Measurable thickness
(1)0.3 mm to 10.0 mm;
(2)PCB which thickness less than 0.3mm shall be
submitted for sample confirmation;
PCB size
Width:80〜650mm;
Length:100〜650mm;
Pore size range
Φ0.10mm〜Φ10mm
Min margin of punching hole
0.1mm
The maximum number of holes in the tested plate
800,000 (round hole) ;
Measuring speed
The four gears of the measured velocity scanning part were available）：3.0±0.5m/min;6.5±0.6m/min;10±0.8m/min;12.5±0.8m/mi;Remark: The drill plate is up to 6.5m/min.
Repeat precision (round hole)
±30um
Repeat precision (non-circular
hole)
Slot: plus or minus 75um;
Irregular holes: 150um;
Aperture accuracy (round hole)
+/-20um(aperture≤1mm)
+/-30um(4mm>aperture>1mm)
+/-40um(aperture≥4mm)
Inspection line number
standard machine: single line, 2 lines;(above line 3, please separately inquire).
Computer
Electric brain industrial computer, CPU: i5 series;Memory: 8G;Hard disk: 1T;Operating system: windows7 X64.
Power source
220V(1±10%)/50Hz.
Power
Power scanning and sorting device: 2KW;
No sorting device: 1.2kw